triplestar

FB090(1)
FB092(1)
FD-1(1)
FD-2(1)
FD-3(1)
FD-Al(1)
FD-B(1)
FR(1)
JF-20 2(1)
JF-700 2(1)
JF-720 2(1)
JF-800 2(1)
SF-1(1)
SF-1b(1)
SF-1d(1)
SF-1p(1)
SF-1s(1)
SF-1ss(1)
SF-1t(1)
SF-1W(1)

Showing 1 - 10 of 22, total 3 pages [First] [Previous] [Next] [Last]

fd-3
Specification: FD-3
Detail: FD-3 modified soft strip is based on PTFE and filled into specific lubricant through a combination of mold pressing and sintering. It is of high wear resistance, good anti i***ctness and good performance in airproof. At presen...

fd-2
Specification: FD-2
Detail: FD-2 soft Strip is based on PTFE and filled with graphite and other lubricants which are milled, pressed and finally sintered into PTFE basis. This material is of good elasticity, low friction coefficient, high wear resistan...

fd-1
Specification: FD-1
Detail: FD-1 soft strip is based on PTFE and mold pressed and sintered into lubricants mainly copper etc. It is of low friction, low wear.Its tensile strength can meet the motion of mono piston ring.Due to its low friction, FD-1 can b...

fd-al
Specification: FD-Al
Detail: FD-Al beeline bearings are one kind of oilless beeline motion products. They're used in moulds' slipways and precision machines instead of steel rolling bushings. The bearings have obvious advantages such as low noise, low cos...

fd-b
Specification: FD-B
Detail: FD-B piston is specially applied for auto shock absorbers. They've anti-friction. Many auto manufacturers, including Xiali, Santana, Buick and Honda use the pistons. Our products are nearly getting to the level of counterpart ...

fr
Specification: FR
Detail: FR is a composites material with bronze wiremesh as frame and calendered with a film of filled poly tetrafluoroethylenne. This is of low friction and low wear, and is rather soft and is to be applied readily by inserting betwe...

fb092
Specification: FB092
Detail: FB092 bronze bushing is based on bronze CuSn8.3P0.3 and evenly distributed drilling oil hole on itsbody. When in assembly,oil or grease should be stored in the holes before bushing is sealed from both ends. FB092 has the advan...

fb090
Specification: FB090
Detail: FB090 is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be incorporated with spherical of diamond shaped indentations or oil grooves as requi...

uf-850
Specification: UF-850
Detail: UF850 is a steel-bronze bushing, which uses 20# steel as backing and is sintered with 6-6-3 bronze in its inside as a lining. The performance of this structure parallels that of all 6-6-3 bronze bushing but saving cost .Theref...

jf-20
Specification: JF-20
Detail: JF-20 is a high tin and aluminum based bushing, which adopts steel as backing and is coated a lining of AlSn20Cu through rolling treatment. It is a fairly good fatigue resistance, load capatity and good anti-corrosion and also...


Showing 1 - 10 of 22, total 3 pages [First] [Previous] [Next] [Last]
1 2 3